DSC03850

It’s available! It does exist! CZ-USA is now distributing the Czech-made buttstock for the Scorpion EVO 3. That would be the same buttstock that has come from the factory on the submachine gun Scorps since 2010, and now it’s available in the U.S. for those who have filed a Form 1 and received ATF approval to go from pistol to SBR. For the time being, the stocks will only be sold in a package along with a 6-part 922(r) compliance kit, which I probably began installing before the FedEx guy was back in his truck. Although I’m a huge fan of the ACE M4 SOCOM stock that previously graced my non-compliant Scorp [paperweight], the factory model certainly has a few advantages. . .

https://www.youtube.com/watch?v=UiLjoK03Z5A

To anyone who makes it to the end of that video, you’re welcome (may contain nudity)

The Stock

That the factory stock works really well on the gun shouldn’t be a surprise, of course, since the Scorp was designed to be an SBR from the get-go rather than some absurd, giant pistol contraption. So while the AR-15 stock adapter worked great, the Czech stock works better.

It matches up aesthetically and compositionally. The angular lines and style work with the rest of the firearm that it was designed for, as does the material — it’s made primarily from the same stiff, thick polymer.

DSC03846

The drop of the stock works properly for the height of the factory iron sights and riserless optics. An integrated magnet sticks the folded stock to the serial number plaque, and a relief cut molded into the rubber recoil pad provides clearance for one of the sling mount rings.

DSC03849

Additionally, the height of the folded stock puts it just out of the way of ejecting brass up top, and at bottom leaves clearance for a right-handed shooter’s strong hand and trigger finger to take a full, normal firing grip without interference.

DSC03857

The hinge structure is all anodized aluminum and takes advantage of the QD mount on the rear of the Scorpion’s receiver. Folding the stock is as simple as pushing the half-moon-shaped release button. When deployed, the stock locks into place with a satisfying clack and is rock solid.

DSC03845

Length of pull adjustment is done very simply by squeezing the lever in front of the recoil pad and sliding that part of the stock in or out. There are three positions in which it will lock — it’s either all the way in, in the middle, or all the way out. Approximate length of pull measurements are 12.5″, 13.5″, and 14.5″, respectively.

scorp-stock-in-out

The 922(r) Compliance Kit

So I’ve probably beaten this dead horse into a pulp by now, but slapping the Czech stock onto the Scorpion EVO 3 S1 pistol makes it a semi-automatic rifle, which makes it subject to 922(r) with a relevant parts count of 16. That’s 16 on the list of parts from which an imported, semi-auto rifle may have a maximum of 10. As you’d guess, then, CZ-USA’s compliance parts kit comes with six parts:

  • Pistol grip
  • Magazine follower (x2)
  • Magazine floorplate (x2)
  • Trigger (the shoe / blade part)
  • Disconnector
  • Muzzle attachment (flash hider)

20151030_160649

I was hoping for a drop-in fire control group replacement, which would take care of four parts (trigger, hammer, sear, disconnector) and likely come with the side benefit of an improvement in trigger pull quality, but that isn’t how it shook out. I’m sure aftermarket FCG units will be available soon enough, although the factory trigger has actually grown on me a bit.

DSC03842

Anyway, the pistol grip and magazine parts are polymer and basically identical to the originals except for raised “CZ-USA” lettering molded in. Domestic origin, therefore, is obvious. The trigger shoe, disconnector, and flash hider are not explicitly marked as U.S. parts, but they are all easily distinguishable from the Czech originals thanks to minor, but obvious differences in physical design.

20151030_181350
Czech left, U.S. right

In all six cases the parts appear to be of equivalent quality to the Czech pieces — material, machining / molding, fit, finish, etc.

On The Range

Everything works as advertised. The disconnector, which appears to be milled from a high quality carbon steel, felt and functioned just like the original. A bit of a PITA to install (another reason a drop-in FCG will be an in-demand product), but it definitely works. Zero issues with the magazine parts or pistol grip, and the magazines ran fine even when wet.

The stock, of course, is the star of the show and it’s just what you’d expect from the stock that was meant to be on this SMG/PDW/SBR in the first place. It took me a while to intuitively mount it high enough on my shoulder, as the drop at heel is a change from a completely straight-combed AR stock. Once I got used to it, it brought the riserless optic up to just the right height for a proper cheek weld, and the fast length of pull adjustment makes it super easy to slam the stock to full length.

DSC03852

Magnet closure is a pretty cool feature. It holds the stock completely wobble-free against the receiver, which is a change from the detent-retained folding stocks I’ve played with. However, it’s also very easy to grab it and slap it into action, locking into place solidly with a nice click.

I admit I may have slightly failed in this review as I didn’t bother to install or test the flash hider. Sure, it’s cleanly machined from steel and nicely parkerized or black oxidized, but as the U.S.-made Liberty Mystic X mount also counts towards 922(r) compliance and lives on the muzzle of my Scorp even when the rest of the Mystic moves to another firearm, I just left it on. Plus, given the option to shoot suppressed, it’s a hard sell to get me to do otherwise.

Conclusions

Once the aftermarket offers enough U.S.-made parts for a Scorpion owner to be 922(r) compliant — and I have two pistol grips plus a magazine follower and floorplate from Yeti Wurks here right now, so we’re getting close already — I expect CZ-USA will start selling the stock on its own. For now, it’s understandably only available with the six, 922(r) parts and the entire package MSRPs at $199.

My Scorpion has seen both a SIG brace and an AR-15 stock, and each of them enhanced the shootability of what is otherwise an awkward pistol. But neither of those were designed from the get-go to grace the tail end of the Scorpion EVO. The factory stock was, and it’s better for it.

For those looking to complete a Form 1 and use the factory stock on the resulting SBR, the official overall length stat (with the factory flash hider) is 26″.

Specifications (CZ Scorpion EVO 3 Stock):

Weight: 15.5 oz
Length of Pull: 3-position adjustable; approximately 12.5″, 13.5″, or 14.5″
MSRP: $199 with the 922(r) compliance parts kit included

Ratings (out of five stars):

East of Installation * * * * *
Five stars for the stock itself. The QD mount makes it the quickest, easiest stock install ever (it just slides on and clicks itself into place). The rest of the kit is straightforward and easy as well, with the exception of the disconnector, which involves punching out a pin and wrestling with a couple of springs and a spacer.

Quality / Fit / Finish * * * * 
The polymer is rock solid and its finish is above average, but there are still some visible mold lines and such. Machining and finish on the aluminum mount are very good, and the fit between mount and receiver is perfect. It’s a high quality piece. As for the 922(r) parts, they seem entirely on par with the Czech parts in every way, and the finish on some is actually slightly better.

Overall Rating * * * *
There are a lot of parts and value here for $199, but it’s frustrating to have to pay to replace perfectly good parts that you’re only replacing due to some absurd law. I expect that once the stock is sold on its own at a lower price, I’d be a lot more likely to give it a five star review. With the 922(r) kit included, CZ-USA gets screwed out of a star here because of my distaste for being forced to spend money due to ridiculous Federal laws (NFA included).

Of course, if CZ-USA begins shipping all Scorpion EVOs with the 922(r) parts already installed then people like me wouldn’t be frustrated about having to throw out the perfectly good Czech parts after paying for near-identical U.S. replacements. My conjecture is that this will begin happening, and CZ-USA will eventually begin importing Scorpions from CZUB missing the six, 922(r) parts and will just add those here. To take the guesswork one step further, with 922(r) taken care of I also bet we’ll see a carbine variant within a year. Factory buttstock, 922(r) kit installed from CZ-USA, 16″ barrel. Likely an extended-length handguard, too.

By the way, the Scorpion is accurate. These are 5-shot groups shot from a sandbag with a 4x scope at 25 yards with the factory flash hider on:

Click to enlarge
Click to enlarge

And then I did a 5-shot group with the Liberty Mystic attached. Yes, this is five shots from 25 yards. It was shot with the American Eagle 147 grain (the HST round was just thrown on the target later for scale).

AmEag147_25_yds

By the way #2, with the stock folded it fits handily into the BLACKHAWK! Diversion Racquet Bag complete with optic, suppressor, and 30-round mag.

20151105_091939 20151105_092057

19 COMMENTS

  1. I bought one of these things just one week ago. I walked into the store, knowing I wanted it, and once it was in my hands, I knew I had to have it right there and then. I don’t plan on SBRing it any time soon, but I did order the folding stock adapter from CZ Custom. I plan to put an arm brace on it, simply because I’m not interested in dealing with NFA items (I move around a lot). Also, I guess technically I can CC this in a backpack or something. I don’t plan on doing it, but it’s a funny thought.

    The Scorpion also looks great. It really feels like the future now. My AR is cool, but it isn’t angular and aggressive-looking. If it was grey, maybe moon grey, it would look like something that belongs on a science fiction film. The safety, strangely doesn’t bother me, and I actually like it, since it’s hard to put back on safe with just the thumb. Instead I use the index finger, in a pinching motion. Really, if you want a new toy, I recommend. At the price point, it’s silly not to.

  2. Can’t wait for my Form 1 to be approved (approaching the 4month mark) and my pre-ordered Stock kit ships from K-VAR.

    But would be wiser to take the trigger and disconnector to a gunsmith for install or is it straight forward enough to try on my own?

    • The trigger is quite easy. The disconnector is more difficult. If you try it yourself, definitely take some photos of the inside of the trigger pack so you can refer to them later primarily to see how the two springs along the right wall of the fcg interact and which direction they point, etc. Snap away for reference. And this video of a guy installing aftermarket trigger springs will probably help, since the disconnector comes out then gets reinstalled as a part of that process.

  3. Does anybody know what the OAL with the stock will be? I ask because in IL SBRS must still be 26″ or more, SBR only gives you a short barrel.

    • Mentioned that immediately before the “specifications” section, actually. CZ says it’s 26″ but when I measure it I get just a hair over 26″. So I think you’re in the clear even with the factory flash hider, but there are various options available that would make it longer than that (e.g. compensators from CZ Custom).

      …this is with the stock fully extended, btw. If your state happens to define OAL as being measured with the gun in the shortest possible fireable configuration then you’ll have to go a different route with the stock (use the non-folding AR buffer tube adapter and an AR stock, or somehow disable the folding capability of the factory stock).

        • By the way, even if we’re talking Federal NFA and ATF stuff, overall length does include muzzle devices even if they are removable. To count towards barrel length a muzzle device would have to be permanently attached, but not to count towards OAL. It’s measured “from muzzle to rearmost point.” That, at least, is the general legal consensus.

          From what I found, Illinois does not specify any definition of “overall length” in its laws. After I couldn’t find it defined in the text of the law, I did a little more searching and found a very recent IL court case where a guy won his appeal based on this fact. He was measuring OAL at a diagonal angle to get the longest possible measurement, whereas measured based on the ATF’s “parallel to the axis of the bore” he was well under 26″. Since IL didn’t define it and IL was prosecuting for the violation of the state law, the court accepted the dictionary definition of “length” as “the longer or longest dimension of an object” and he was acquitted of the charges. There’s definitely no requirement that the length be “permanent,” which is also mentioned specifically in that court case (example given that most shotguns can fire with the shoulder stock completely removed, yet the stock is always counted in OAL anyway. Same, then, goes for a muzzle device).

        • So yes, this is a state specific law. All rifles, regardless of barrel length, must be at least 26 OAL. It’s messed up. NFA branch is fully aware of this and will not approve any form 1s under 26.

          IL law does not specifically state how this measurement is captured.

        • “IL law does not specifically state how this measurement is captured.”

          You should read that court case I linked to. Looks like you can measure whatever way you want in order to achieve the longest possible result haha. At any rate, even measuring per ATF spec I think you’re a-okay with the Scorpion here, if just barely.

  4. These kits aren’t available on CZ’s website, but they’re selling on GB with at least a 50% markup.

    • They’ll be on CZ’s webstore soon. I think they’re feverishly assembling the kits before they launch online ordering. They did mention on their FB page that some have already shipped to distributors that had pre-ordered.

  5. What’s the likelihood that CZ-USA eventually starts selling assembled 922(r) compliant guns, instead of having to plunk down an extra $200 for the compliance kit?

    • I sort of digressed into that in the “overall rating” section, but I think it’s highly likely. At least, that’s what I’d do were I CZ-USA.

      …also, the stock and the compliance kit are two separate things. They’re being sold together now, and I have no clue how much either would sell for without the other, but it’s $199 for everything…

      • Wow, that was a fast reply – thanks!

        Anyway, yeah, I assumed a pre-assembled compliant gun would be either a pistol, or a carbine with a 16″ barrel. It’s out of my reach until I move to a free state anyway, but at least this gives me something I can treat myself with once I’m out…

Comments are closed.